|
|
In here a section about handy tools to have, maybe some home made specials to save mega bucks, etc. Like...the engine mounting bolts. They have "thrust nuts" that are special removing tools type thingamajigs. Same as the steering head nuts.
well, the dimensions of these tools, if you want to make them yourself are provided below. pin thickness is around circumference pin width is across the socket pin depth is height Head nuts (pins at 90 degs) O/D 44mm I/D 36mm Pin thickness 4mm Pin width 2mm (Outside of pin is flush with socket) Pin depth 6mm Socket depth (not including pins)50mm
Insert (pins at 120 degs, recess's at 90 degs) recess for the above 4 pins, plus 3 pins on opposite side at 120 degs apart O/D 45mm I/D 33mm Pin thickness 4mm Pin width 2mm (outside of pin is 1.5mm from outside of socket) Pin depth 6mm Socket depth (not including pins) 15mm
Engine mount XL (pins at 90 degs) O/D 50mm I/D 36mm Pin thickness 5mm Pin width 7mm Pin depth 5mm Socket depth (not including pins) 20mm
Engine mount L (pins at 90 degs) O/D 34mm I/D 25mm Pin thickness 4.5mm Pin width 3mm Pin depth 3mm Socket depth (not including pins) 22mm
Engine mount M (pins at 90 degs) O/D 35mm I/D 26mm Pin thickness 6mm Pin width 4.5mm Pin depth 5mm Socket depth (not including pins) 21mm
Engine mount S O/D 20mm I/D 14mm Pin thickness 4mm Pin width 3mm Pin depth 3mm Socket depth (not including pins) 22mm
|
|
© 200mph.org.uk |